250cc "Redneck Intake Series" Upgrade Level 3

Level 3 completes the Fuel/Air & Spark portions of our 250cc Redneck series upgrades.
It don't get any better than this!

 2" id.x 6" L, Dual stage UNI Pod Air filter  for a better air flow,

30MM CV Pumper carb w/ auto choke to add more horse power through the whole power band and a super quick response when you hit the gas!

+ 3-Main Jets of your choice to tune your new carburetor! (Pick your range of jets in the option box below, (our 30mm comes w/ a #125 main and #40 pilot).
Now that we have a larger fuel and air mixture to work with, We light it up with our Exclusive,

(DC) Digital Adjustable "Smart CDI" and enhanced Coil for your 250cc, Scooter, ATV or Buggy.

This doesn't LOOK like your stock CDI and Coil because it isn't! 20 Volts and a full 3 amps of extra power, making cold starts a thing of the past. Provides a more complete combustion and smooths out your engine at high rpms!!!

 What are the benefits with our "Smart" CDI/Coil combo?

• When you replace your stock CDI for a performance one, you really need to upgrade your coil as well or you lose much of the benefit of your new CDI.

• Now, It can be mounted closer to your Spark plug meaning less resistance and a MUCH BETTER SPARK!

• Waterproof casing!

• Unlimited RPM range, Auto adjusts!

• Our "Smart CDI" Digitally elongates your spark time from a stock .02 duration to .06 seconds! More burn, more HP!

• Digitally advances your ignition automatically between 3000rpm and 8000 rpms for best performance and it retards after 8000rpm to prevent engine knocking!

• You can manually adjust the advance after 8000rpm if you have a big bore! It's simple to adjust, just turn the dial and go!

• There is a 26 degree range of Advance/Retard angle, 13 degrees in each direction. Most stock machines will not need to mess with the dial, the CDI will do its thing automatically!

• Get close to 1hp more from bottom end to mid range

• Great Upgrade for stock or Big Bore motors!

There's nothing else like it out there for riders who want the best!

Don't forget to add an Iridium plug for the best performance!

Most all 250 CDI's are DC, just check your existing plugs to be sure the plug configuration will fit with the pics provided here. (2 wires into the small pug and 3-4 wires on the larger plug on your stock CDI) We hear that this will NOT fit the Carter GTR250cc due to different plug types but that may be specific to year and model, please check carefully before ordering.

*Some model tachometers get their signal from the CDI directly and may stop working with this CDI installed. This can be corrected with a simple ground wire on the unused pin.

Next, You can't have all that extra spark and fuel going to waste on your old standard spark plug so we added in an,

Iridium IX Plug,  DPR7HIX - (Fits most CN/CF 250cc Chinese motors). Better burn and a cleaner running plug for these Chinese Imports. Iridium alloy has extremely high melting point, perfect for today’s high-tech, high-performance small engines and outstanding acceleration, high fuel efficiency and durability. This plug runs in the "7" heat range which we have found runs the cleanest in our 250.

THIS KIT WILL FIT most 250CC SCOOTERS, BUGGIES AND ATV'S with a CN250 or CFMoto250 found in most buggies and scooters imported from China